Add some old world charm to your yard with these Antique Style Gate Hardware products from European manufacturer – Gatemate.

1. Gatemate Antique Heavy Duty Fleur de Leys Hinges

Antique Heavy Duty Fleur De Leys Hinges-500x500

16″ Decorative Antique Tee Hinge for Wood Door and Gates. Excellent for Creating or Restoring the Old World look. Hand Pounded Black Finish. Stainless Steel Fasteners Included. Available in 6″, 9″ and 12″

2. Gatemate Antique Ring Gate Latch

Antique Ring Gate Latch-500x500

Heavy Duty Antique Style latch handle for Custom Gate. Excellent for restoring or creating the Old World look. Uses include Gates, Carriage Doors, and Shed Doors. Comes with Stainless Steel Fasteners and Padlock Eyes. Suitable for up to 4″ thick gates or doors. For thicker applications use the Extension Spindle. Hand Pounded Black finish.

3. Gatemate Antique Mission Door Grill

Antique Ring Gate Latch-500x500

Decorative Door Grill for use on Wood Doors and Gates, Garage Doors, Carriage Doors, and more. Black Finish. Includes Stainless Steel Screws. Available in 12″ only

4. Gatemate Antique Lever Lock Handle

Antique Lever Lock Handle-500x500

6″ x 2″ Lever Lock Handle Set includes handles for both sides of the gate/door. Ideal for creating or restoring the old world look. Suitable for up to 3″ thick doors or gates. Recommended for use with Mortise Sash Lock. For thicker applications, extension spindle is available. Hand Pounded Black Finish. Stainless Steel Screws Included.

How to Install the Antique Lever Lock Handle:

NOTE: If locking is desired, install mortise first. (Mortise sold separately.)

Works on 1-7/8” – 2 ¼” thick door. Thinner door will require spindle to be trimmed. Thicker doors will require a longer spindle.

1. Determine desired handle height.

2. Drill a ½” hole 1 ¾” on center back from edge of door/gate.

3. Insert spindle in hole and position handles on either side of door. Fasten handle plates with screws provided.

Directions are for guidance only. Requirements may vary due to individual circumstances. We recommend drilling smaller pilot holes before screwing to reduce the chance of splitting wood, and when going completely through wood products, drill from both sides.

5. Gatemate Antique Drop Rod

ANTIQUE DROP ROD2-500x500

Decorative Heavy Duty Drop Rod (Cane Bolt) for Wood Gates and Doors. 24 x 5/8″ Cane. Ideal for Creating or Restoring the Old world look. Black finish. Includes Stainless Steel Fasteners.

6. Gatemate Antique Door Studs

Antique Door Studs-500x500

Door Studs (for looks only). Makes an excellent accent for Wood Gates, Doors, Shutters, and more. Ideal for creating or restoring the Old World look. Available in 3/4″ (10 per pack), 1 1/8″ (10 per pack) , 1 1/2″ (5 per pack). Also available in Bulk boxes of 50. Hand Pounded Black Finish.

Antique Clavos-500x500

Clavos (for looks only). Make an excellent accent for Wood Doors, Gates, Garage Doors, Shutters, and More. Ideal for Creating or Restoring the Old World Look. Bronze Hand Pounded Finish. Available in 1 1/8″ (pack of 10), and 1 1/2″ (pack of 5). Also comes in bulk boxes of 50 pcs.

7. Gatemate Antique Door Knockers

569 2003 Georgian Door Knocker2-500x500

Georgian Decorative Door Knocker. Ideal for Creating or Restoring the Old World look. Black Finish. Stainless Steel Fasteners included. Available in 8″ only

9_lion_door_knocker-500x500

Lion Decorative Door Knocker. Ideal for Creating or Restoring the Old World look. Hand Pounded Black Finish. Stainless Steel Fasteners included. Available in 4″ only

How to Install the Lion Head Door Knocker:

The hardware included is for a 2 ¾” thick door.

1. Determine the desired height for door knocker.

2. Locate the center of the door and drill a ¼” hole ½” down from where the top of where the door knocker will be. Drill all the way through the door.

3. Drill two more corresponding holes directly below the first one 3 ½” and 5 ¼” down respectively from the top hole. Drill all the way through the door.

4. While holding door knocker in proper place on outside of door, insert screws in top two holes from the inside of door and tighten.

5. Hold strike plate over bottom hole on outside of door and insert screw from inside of door and tighten.

Directions are for guidance only. Requirements may vary due to individual circumstances. We recommend drilling smaller pilot holes before screwing to reduce the chance of splitting wood, and when going completely through wood products, drill from both sides.

All Gatemate products are available at POCO Building Supplies. Some items are special order. For a full list of Gatemate Fence and Gate Hardware items visit abbeytrading.com

REQUEST A QUOTE